USB Interface for Windows, macOS, iOS and Android devices Lossless HD-audio transmission up to 192 kHz / 32 Bit Direct digital signal transmission to DSP for lossless audio processing Asynchronous USB connection with own clock generators for highest jitter immunity Automatic signal detection Device-specific side panel included in delivery Note: The HD-AUDIO USB-INTERFACE has two operating modes. Full Speed Mode (default): Highest compatibility with all Android, iOS, macOS and Windows devices. Supports sample rates up to 96 kHz / 32 Bit. No driver installation necessary. High Speed Mode: Compatible with most of all Android ( Version 6), iOS, macOS and Windows devices. Supports sample rates up to 192 kHz / 32 Bit. An additional driver installation for Windows devices is necessary to use sampling rates higher than 96 kHz / 32 Bit. Note: No connection wires included. A MiniUSB wire is needed for most configurations. For Android devices an additional MicroUSB OTG cable is required. For Apple devices an additional Camera Connection kit or a Lightning to USB cable is required. Attention: The HD-AUDIO USB-INTERFACE does not support charging. Technical data Input sampling rate32 kHz to 192 kHz / 16 Bit, 24 Bit or 32 Bit Input formatPCM Supported device operating systemsWindows, macOS, iOS, Android Additional featuresAsynchronous USB connection with own clock generators for highest jitter immunity.