Technical data Output power RMS / Max. – @ 4 Ohms Channels A – D: 4 x 65 Watts (min. 3 Ohms) – @ 2 Ohms – – @ 1 Ohm – – bridged @ 4 Ohms – – bridged @ 2 Ohms – – Subwoofer output @ 4 Ohms Kanal E – F: 2 x 90 Watts – Subwoofer output @ 2 Ohms Kanal E – F: 2 x 160 Watts Amplifier technology Class GD Inputs 6 x Highlevel speaker input 1 x Optical SPDIF (12 – 96 kHz) 1 x MEC 1 x Remote In Input sensitivity 2.8 – 11 Volts Input impedance RCA / Cinch – Input impedance highlevel 9 – 33 Ohms with ADEP.3 Outputs 6 x Speaker output 1 x RCA / Cinch 1 x Remote Out Output voltage RCA / Cinch 3 Volts RMS Frequency response 10 Hz – 22,000 Hz DSP resolution 64 Bit DSP power 295 MHz (1.2 billion MAC operations/second) Sampling rate 48 kHz DSP type Audio signal processor Signal converters A/D: BurrBrown D/A: BurrBrown Signal-to-noise ratio digital input 106 dB (A-weighted) Signal-to-noise ratio analog input 104 dB (A-weighted) Distortion (THD) 0.03 % Damping factor 100 Operating voltage 10.5 – 18 Volts (max. 5 sec. down to 6 Volts) Power rating DC 12 V ⎓ 35 A max. Idle current 360 mA Max. remote output current 500 mA Operating temperature range -40°C to +70°C Fuse 1 x 30 A LP-Mini-fuse (APS) Additional features Class GD technology with dynamically controlled power supply, 32 Bit CoProcessor, ADEP.3 circuit, Start-Stop capability, Smart Control Port, USB, MEC slot, Auto Remote switch, galvanically isolated Line Out Dimensions (H x W x D) 46 x 130 x 130 mm / 1.81 x 5.12 x 5.12″ Scope of delivery 1 x MATCH UPGRADE amplifier UP 6DSP 5 x Connection cable 1 x Mounting plates & material 1 x USB cable 1 x Instruction manual