Channel8 channel (2 channel x 4) Minimum Speaker load Capability4 ohm BTL ConnectionYes Speaker Output Terminal4 (Euroblock) Audio Input TerminalRCA: 4 Audio Output TerminalRCA (2-ch through out): 4 Trigger In / Out4 / 4 Remote In / Out1 / 1 Rated Output Power (1 kHz, 0.9% THD, 2ch driven)Normal (4 / 8 ohms): 90 / 50 W, Bridge (8 ohms): 100 W Rated Output Power (1 kHz, 0.9% THD, 1ch driven)Normal (4 / 8 ohms): 100 / 50 W, Bridge (8 ohms):200 W Dynamic Power (20 Hz-20 kHz, 0.08% THD, 2ch driven, 20 ms burst)Normal (4 / 8 ohms): 80 / 40 W, Bridge (8 ohms): 150 W Dynamic Power (1 kHz, 0.9% THD, 2ch driven, 20 ms burst)Normal (4 / 8 ohms): 100 / 50 W, Bridge (8 ohms): 200 W Dynamic Power (1 kHz, 0.9% THD, All ch driven, 20 ms burst)Normal (4 / 8 ohms): 80 / 50 W, Bridge (8 ohms):170 W Maximum Effective Output Power[1-ch driven, 1 kHz, 10% THD] Normal (4 / 8 ohm):130 / 65 W, Bridge (8 ohm): 260 W Total Harmonic Distortion[SP OUT, 20 Hz-20 kHz, 25 W, 8 ohm] 0.04% Frequency Response[1 kHz + 0 / -3 dB] SP OUT AUX IN: 5 Hz-40 kHz Channel Separation[SP OUT, 1 kHz / 10 kHz] 78 dB / 62 dB Signal to Noise Ratio[SP OUT AUX IN] 108 dB Maximum Input Signal[PRE OUT L / R, 0.9% THD] 1 V Gain[SP OUT 1 V Input] 25.8 dB Input Sensitivity[1 W Power, 8 ohm] 150 mV, [MAX (50W) Power, 8 ohm] 1.0 V GeneralPower Consumption130 W, [All Zone On] No Signal Condition: TBD, [All Zone Off] Audio Sense On: 14.8 W Standby Power ConsumptionAudio Sense Disable: 0.3 W, Audio Sense Enable / Mode Standby: 0.5W Power Management (Auto Power Standby)Yes (On / Off) Dimension (W × H × D) mm[Table Top Mount with Adhesive Feet] 437 x 46 x 443 mm 17-1/4” x 1-3/4” x 17-3/8”, [Table Top Mount with Adhesive Feet and Faceplate] 437 x 46 x 453 mm 17-1/4” x 1-3/4” x 17-7/8”, [Rack Mount] 481 x 44 x 443 mm 18-7/8” x 1-3/4” x 17-3/8”, [Rack Mount with Faceplate] 481 x 44 x 453 mm 18-7/8” x 1-3/4” x 17-7/8” Weight6.0 kg.